New Way Stationary Engines

Aim - To serve and support the New Way Stationary Engine restoration community.
There was a New Way Stationary Motor inclined to Hit and Miss. It was designed that way but intermittently it would missfire and this in the confines of the beekeepers shed fired my imagination, grabbing my senses. I just loved the sound of the New Way 3.5Hp working - likely fuelled by a too rich mixture.
With each missfire came the tell tale puff of blue smoke and via the old sawbench, the beekeeping manufacturing business was underway, alive and well. Alf was in his element. Romance, nah, hard work but Hoots the New Way went a long way in firing the imagination of times past running in the present. The present, after all, that's where life is, it's not in the past, but romancing the past, that's the present if you're living it.
The priveledge of life. Present and past is now!!! - alive.

Ye Olde Sawbench & New Way Motor kept company by Howard Rotary Hoes

REPRODUCTION PARTS

Listed
  1. Mufflers
  2. Shrouds
  3. Shroud Decals

SHROUDS 3.5Hp Type "C" - Quality as per photos.(click) Designed to visually match the original New Way factory product. Additionally shroud holes from this supplier are flared for strength and finish. (like original)
Shrouds restricted to this size New Way Vertical at this point in time.
Contact :- Email axisgridohio@aol.com re availability, delivery times and costs
------------------------------------------------------------------------------

-------------------------------------------------------
MUFFLERS - Fit some smaller Horizontal Jewels
Quality as per photos - Cast (light weight metal) in shape as a 3 piece with internal baffle, front outlet holes and large threaded inlet for exhaust. 5inch Diameter
Contact :- Email geo.covey@gmail.com re availability, delivery times and costs

-------------------------------------------------------------


-------------------------------------------------------------
SHROUD DECALS- Suit Large Vertical & Horizontal New Way Engine shrouds
Professionally printed with excellent clean lines and clear print ready to be adhered on to your already painted New Way Engine shroud. (Check sizing for your particular engine.) The actual decal outside dimensions are shown in the 1st photo.

NOTE: Generally a pair is required with one decal fitted to each side of the shroud.

As a guide, Instructions are as follows:
  1. Make sure surface is clean and free of oil
  2. Check fit while backing is still in place
  3. Cut Any Muffler/Intake Holes Thru Clear Backing
  4. Mark Starting/Ending Points w/ Pencil to Ensure Square Install
  5. Start at a corner and apply using pressure over backing material
  6. Peel backing material back over itself at 180 degree angle very slowly
  7. As you peel, ensure that letters are coming off backing square as you remove
  8. There should be no need to clearcoat over decal/but it can be done to ensure long life
DECAL - Showing detail and dimensions
Decal with backing prior to installation
END RESULT EXAMPLE - Decal installed on painted red shroud.
(Muffler Side)


Contact :- Email timbishop@centurytel.net re availability, delivery times and costs
-------------------------------------------------------------



-------------------------------------------------------------


OTHER REPRODUCTION PARTS - Do you know of other quality reproduction parts being produced eg New Way stamped oilers that I could list as a service to the producer and enthusiast alike. geo.covey@gmail.com

1 comment:

  1. tcairo15July 1, 2019 at 6:37 AM

    Hi There Guys ! I have our First New Way in the shop for restoration and needs help with Parts Procurement
    Any Help would be awesome !!!!

    ReplyDelete

Subscribe to: Posts (Atom)